Price List |
1911 Auto's - Colt and Clones
Action work, without any new parts. Includes eliminate all creep, set pull weight, tune extractor, polish feed ramp and barrel throat. |
$85.00 |
Action work, replacing lock-work parts. Includes eliminate all creep, set pull weight, tune extractor, polish feed ramp, polish barrel throat, and all other reliability work. Price includes parts. |
$165.00 |
Tighten slide to frame fit. |
$125.00 - $145.00 |
11 degree muzzle crowning. |
$20.00 |
Tune and shape extractor for reliability and consistent functioning. |
$35.00 |
Correct feeding problems. |
$45.00 - $65.00 |
Port and flare ejection port. Refinishing additional if required. |
$65.00 |
Replace extractor, shape and tune. Price includes part. |
$70.00 |
Fit oversize firing pin stop. Price includes part. |
$25.00 |
Bevel magazine well. |
$55.00 |
Stake in front sight. Price includes sight. |
$45.00 |
Fit beavertail grip safety. Price includes part. May require refinishing. |
$85.00 - $145.00 |
Modify frame and thumb safety for high-rise grip safety. Price includes part. Does not include refinishing. |
$135.00 - $195.00 |
Checker front strap. 20, 25 or 30 lines-per-inch. Price does not include refinishing. |
$275.00 - $325.00 |
Modify backstrap / mainspring housing to be more parallel to the front strap. Price includes refinishing. |
$185.00 |
Browning Hi Power
Checker front strap. 30 lines-per-inch. * |
$350.00 |
Checker front strap. 40 lines-per-inch. * |
$425.00 |
Checker back strap. 30 lines-per-inch. * |
$200.00 |
Checker back strap. 40 lines-per-inch. * |
$250.00 |
* Please note: If frame is hard chromed, add $200.00 for de-plating, then re-plating. (Includes shipping to and from for each process) |
Colt Single Action Revolvers
Action and trigger tune. Smooth and lighten. Eliminate all creep. |
$125.00 |
Colt Double Action Revolvers (Python, Trooper, 1917)
Action and trigger tune. Price includes spring. |
$135.00 |
Correct timing. |
$65.00 |
Ruger Single Action (All models)
Action and trigger tune.
Includes squaring and truing of all contact surfaces, final honing with ruby stones, eliminating all creep and setting pull weight to your specifications. |
$135.00 |
Free wheel ratchet conversion. Price includes part. |
$85.00 |
Half-cock action conversion. Price includes parts. |
$285.00 |
Fit oversize cylinder base pin. Price includes part. |
$40.00
|
Fit oversize cylinder stop bolt. Price includes part. |
$45.00 |
Ream undersize chamber throats to bore diameter. |
$65.00 |
Polish chambers. (.38/.357) |
$55.00 |
Chamfer chamber mouths. |
$35.00 |
Ruger Double Action Revolvers (SP and GP models)
Smooth and lighten double action pull. Eliminate all creep. |
$105.00 |
Polish chambers. (.38/.357) |
$55.00 |
Chamfer chamber mouths. |
$35.00 |
Bob and re-contour hammer. |
$45.00 - $65.00 |
Smith and Wesson Double Action (All Models)
Action and trigger tune. Price includes reduced power rebound spring. |
$135.00 |
Chamfer chamber mouths. |
$35.00 |
Eliminate end-shake. |
$55.00 |
Set barrel/cylinder gap. |
$95.00 |
Serrate front sight blade. |
$25.00 |
Straighten bent crane. |
$45.00 |
Correct timing. Price includes part if needed. |
$95.00 - $135.00 |
Correct forcing cone. |
$35.00 |
Bob and re-contour hammer. |
$45.00 - $65.00 |
Grip Making (Non-Checkered) (Price does not include grip material)
Single action revolvers. (Colt, Ruger, and Freedom Arms) |
$395.00 |
Double action revolvers. (Colt Python, 1917 Colt and S&W, and all other Smith and Wesson models) |
$425.00 |
1911's. |
$125.00 |
Handgun Refinishing
1911's. |
$295.00 - $545.00 |
Revolvers. |
$375.00 - $625.00 |
Handgun Cleaning
Completely disassemble, clean and inspect, and safety check. |
$65.00 |
Completely disassemble, clean and inspect, and safety check. (Excessively dirty guns) |
$85.00 |
M Neck Expander / Powder Dies
M Neck Expander / Powder Dies. * |
$68.00 |
* Plus $8.30 shipping whether you order single or multiple dies. USA orders only. |